bing tracking image

Chevrolet Camaro Hitch Bike Racks Installation And Review Videos

     

Hollywood Racks Destination 2 Bike Platform Rack Review - 2020 Chevrolet Camaro- Video

Hollywood Racks Destination 2 Bike Platform Rack Review - 2020 Chevrolet Camaro

Hi, John with etrailer. Today we're taking a look at the Hollywood Racks Destination 2 bike rack on our 2020 Chevrolet Camaro SS. Now this rack is a platform style rack. It is a two bike capacity. Now, right off the bat I'll tell you this is not a good candidate for E-bikes. The weight capacity is only 35 pounds per bike. more


Watch Video

7/18/2023 8:10:30 AM



Thule Helium Aero Hitch Bike Rack Review - 2012 Chevrolet Camaro- Video

Thule Helium Aero Hitch Bike Rack Review - 2012 Chevrolet Camaro

Today on our 2012 Chevrolet Camaro we'll be test fitting the Thule Helium Aero 2 bike carrier for 1-1/4" and 2" hitches, part number 2H9042. To begin our test fit we'll slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and allow our attached pin to fall into place. We use the hand knob here at the rear of the shank to secure our bike rack to our vehicle and engage our anti-rattle device. Now we'll go over some clearance measurements. We have about 12 1/2" of ground clearance. We've added about 12" to the overall length of our camaro. As you can see, we have full access to the trunk of our car with our bike carrier in its upright position.If you need more room to get into your trunk you can tilt your carrier away from your vehicle by pulling the lever here at the base of the mast. Now we'll pull the level at the top of the mast to swing out our dual arms. more


Watch Video

9/4/2013 11:43:16 AM



Kuat Beta Hitch Bike Rack Review - 2012 Chevrolet Camaro- Video

Kuat Beta Hitch Bike Rack Review - 2012 Chevrolet Camaro

Today on our 2012 Chevrolet Camaro, well be test fitting the Kuat Beta Folding Two Bike Aluminum Rack for 1-1/4 hitches, part number B202-114. To begin our test fit, well slide the shank of the carrier into the receiver tube of the hitch. Line up the pin hole and install our pin and lock. At the rear of the shank, well tighten the hand knob to secure our bike rack to our vehicle and engage our anti-rattle device. Now well go over some clearance of measurements. We have about 11-1/2 inches of ground clearance. more


Watch Video

9/4/2013 11:37:25 AM



Thule Apex 4 Hitch Bike Rack Review - 2012 Chevrolet Camaro- Video

Thule Apex 4 Hitch Bike Rack Review - 2012 Chevrolet Camaro

All right today on this 2012 Chevrolet Camaro we are going to do a test of part number TH9025 from Thule, this is Apex-4 bike carrier. A couple of quick notes about this bicycle rack that will work with 1-1/4 inch receiver hitches both class I and class II. However with a class I receiver hitch you are only limited to carrying two bikes. This will also work with a 2-inch receiver hitch which the included spacer. We'll go ahead and start our test fit by installing the bike rack into the hitch we'll make sure that the integrated hitch pin snaps into it then we'll go ahead and tighten it down with the anti-rattle device. All right with the bike rack installed we'll go ahead and give you some measurements that will give you an idea of clearing between the bicycle rack and the car and the ground. more


Watch Video

2/13/2012 1:11:02 PM



Rhode Gear Highway Hitch Bike Rack Review - 2012 Chevrolet Camaro- Video

Rhode Gear Highway Hitch Bike Rack Review - 2012 Chevrolet Camaro

All right, today on our 2012 Chevrolet Camaro we're going to do a test fit of part number RG8015220 from Rhode Gear. This is our Highway 2 bike carrier. A couple quick notes about this bike rack is that it will work with 1-1/4" receiver hitches both class I and class II. It will also work with class III receiver hitches with the included spacer. We'll go ahead and start off our test fit by installing the bike rack into the hitch then we'll install the anti-rattle bolt and put the safety pin on the other side. All right, with the bike rack installed we'll go ahead and give you some measurement that will give you an idea of clearance between the bike rack and the car and the ground. more


Watch Video

2/10/2012 3:25:38 PM



SportRack EZ Hitch Bike Rack Review - 2012 Chevrolet Camaro- Video

SportRack EZ Hitch Bike Rack Review - 2012 Chevrolet Camaro

All right, today on 2012 Chevrolet Camaro we're going to do a test fit of part number A30901 from Sportrack. This is a Sportrack EZ 2 bike rack. Couple of quick notes about this bicycle rack that will work with 1-1/4" receiver hitches both class I and class II. It will also work with class three receiver hitches with provided spacer. Okay, we'll go ahead and start off our test fit by installing the bike rack into the hitch then tighten it down in anti-rattle bolt then installing the safety pin on the other side. Okay, with our bike rack installed we're going to go ahead and give you some measurements that give you an idea of clearance between the bicycle rack and the car and the ground clearance. more


Watch Video

2/10/2012 3:00:58 PM



Thule Vertex 4 Hitch Bike Rack Review - 2012 Chevrolet Camaro- Video

Thule Vertex 4 Hitch Bike Rack Review - 2012 Chevrolet Camaro

Alright today on this 2012 Chevrolet Camaro, were going to do a test fit for part number TH9029 from Thule. This is a Vertex 4 Bike Carrier. A Couple of quick notes about this bike rack is that this will work with 1-1/4-inch receiver hitches both class 1 and class 2. However, with a class 1 receiver hitch, youre only limited to carrying two bikes. This will also work in 2-inch receiver hitch with the included spacer. On this car, well be using a class 1 receiver hitch. more


Watch Video

2/10/2012 2:29:23 PM



  1